Haas UMC750 5 Axis Vertical Machining Center (2018)

Haas UMC750 5 Axis Vertical Machining Center (2018)
X-Axis Travel: 30.0 in (762 mm)
Y-Axis Travel: 20.0 in (508 mm)
Z-Axis Travel: 20.0 in (508 mm)
B-Axis (Tilt): +110° to -35° (varies slightly by vintage up to +120°)
C-Axis (Rotation): 360°Spindle Nose to Table (Min - Max): 4.0 in - 24.0 in (102 - 610 mm)
Integrated Trunnion TablePlatter Diameter: 19.7 in (500 mm)
Maximum Weight on Table: 660 lbs (300 kg)
Table Size: 24.8 in x 19.7 in (630 x 500 mm)T-Slot Width: 0.626 in to 0.630 in (16 mm)

Spindle Specifications

Spindle Taper: 40 Taper
)Standard Spindle Speed: 8,100 RPM inline direct-drive
Optional Spindle Speed: 12,000 RPM high-speed inline direct-drive
Spindle Power Motor: 30 hp (22.4 kW) Vector Drive system
Maximum Torque: 90 ft-lb @ 2,000 RPM (122 Nm)
Automatic Tool Changer (ATC)
Standard Capacity: 40+1 station side-mount tool changer (30 or 50 pockets available on redesigned configurations)
Maximum Tool Diameter (Full): 2.5 in (64 mm)
Maximum Tool Diameter (Adjacent Empty): 5.0 in (127 mm)
Maximum Tool Length: 12.0 in (305 mm)
Maximum Tool Weight: 12 lbs (5.4 kg)
Rapid Traverse (X, Y, Z): 900 in/min to 1,000 in/min (22.9 - 25.4 m/min)
Max Cutting Feedrate: 650 in/min (16.5 m/min) Dimensions & Power RequirementsMachine Weight: Approx. 18,000 lbs to 19,200 lbs (8,165 - 8,709 kg) depending on options
Footprint: Approx. 162 in x 113 in x 120 in (4.1 m x 2.8 m x 3.0 m)Coolant Capacity: 75 gallons (284 liters)Air Required: 100 psi @ 4 scfm (6.9 bar @ 113 L/min)