Stratasys F370 Industrial 3D Printer

Stratasys F370 Industrial 3D Printer

System Size and Weight 1,626 x 864 x 711 mm (64 x 34 x 28 in.), 227 kg (500 lbs) with consumables
Build Tray Dimensions 355 x 254 x 355 mm (14 x 10 x 14 in.)
Noise Specification 46 dB maximum during build, 35 dB when idle
Material Bays 4 total (2 model / 2 support)
Layer Thickness:
Stratasys Preferred Materials
Achievable Accuracy3 Parts are produced within an accuracy of +/- .200 mm (.008 in),
or +/- .002 mm/mm (.002 in/in), whichever is greater.
Network Connectivity Wired: TCP/IPv6 protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless-ready: IEEE 802.11n, g, or b; Authentication: WPA2-K, 802.1x EAP; Encryption: CCMP, TKIP
Software GrabCAD Print, GrabCAD Print Pro4
, Insight™
System Requirements Windows 10 and 11 (64 bit only) with a minimum of 8GB RAM (16GB or more recommended)
Operating Environment Operating: Temperature: 59 - 86 ºF (15 - 30 ºC), Humidity: 30 - 70% RH
Storage: Temperature: 32 - 95 ºF (0 - 35 ºC), Humidity: 20 - 90% RH
Power Requirements 100 - 132V/15A or 200 - 240V/7A. 50/60 Hz
Certifications5 GREENGUARD Certified per UL 2904 when using ABS, ASA, and QSR Support™ materials
Regulatory Compliance CE (low-voltage and EMC directive), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach