Haas UMC-750SS 5 Axis Universal Machining Center (2022)
Have one to sell?
ConditionUsed
1 available
5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centers are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS has an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity.
Haas UMC-750SS 5 Axis Universal Machining Center (2022)
B Axis - Tilt
Travel: 120° to 35-°
Max Speed: 170°/sec
Torque (Continuous): 2240 ft-lbf
Brake Torque: 2,000 ft-lbf
C Axis - Rotation
Travel: 360°
Max Speed: 179 °/sec
Torque (Continuous): 1854 ft-lbf
Brake Torque: 900 ft-lbf
Max Part Swing: 27 in
Platter
Platter Diameter: 19.70 in
Max Weight on Platter: 660 lb
T-Slot Width: .626 in to .630 in
Number of Std T-Slots: 7
T-Slot Center Distance: 2.48 in
FeedRates -
Max Cutting: 650 ipm
Rapids on X: 1200 ipm
Rapids on Y: 1200 ipm
Raipds on Z: 1200 ipm
Axis Motors -
Max Thrust X: 2750 lbf
Max Thrust Y: 2750 lbf
Max Thrust Z: 3400 lbf
Tool Changer -
Type: SMTC
Capacity: 30+1
Max Tool Diameter (full): 2.5 in
Max Tool Diameter (adjacent empty): 5 in
Max Tool Length (from gage line): 12 in
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 1.80 s
Chip-to-Chip (avg): 2.40 s
General -
Coolant Capacity: 55 gal
- 5 Axis Trunnion
- High Speed 30+1 ATC Side Mount
- Through Spindle Coolant High Pressure
- Chip Conveyor
- Enclosure Exhaust
- Programmable Coolant Nozzle
- 12000 RPM, 40 Taper, 30 HP, Vector, Inline Direct Drive,
- Auxiliary Filter
-
- Full Enclosure Top Covered
- Wireless Intuitive Probing
- Visual Programing System, Renishaw
- Macros, Spindle Orientation, Coordinate Rotation and Scaling
- High Speed Machining
- 55 Gallon 208 liter Coolant Tank
- Touch Screen Control Widescreen Monitor
- Large Remote Jog Handle with Touchscreen Display
- Ethernet Interface
- WiFi Connection for the Haas Control, Haas Drop Wireless Transfer
- Early Power-Failure Detection Module
- Ethernet Interface
- HaasConnect Remote Monitoring
- Safe Run
- 1GB Memory
- CNC Cabinet Cooler
- Dynamic Work Offsets and Tool Center Point Control
- Media Display M-Code M130
- Position Scale Feed back on B and C Rotary Axes
- Rigid Tapping, Synchronized Tapping, Built In Tap Cycles and up to 8X retract speed.
- CNC Control Cabinet Cooler
- Power Surge Protection
- Early Power-Failure Detection Module
- Second Home Position
- Advanced Tool Management
- Media Display M-Code; M130
- HaasConnect: Remote monitoring
- Safe Run
- HaasDrop
- High-Speed Machining
- Dynamic Work Offsets and Tool Center Point Control
- Rigid Tapping
- Standard Program Memory, 1 GB
We use cookies to improve your experience. Privacy Policy.