Tos Model SN-50C 20" x 40" Engine Lathe

20"/27" X 40" Tos Trencin Gap Bed Engine Lathe
Model Sn 50 C Machine Reconditioned, Including Bed Regrinding

Swing Over Bed ---------------------------- 20"
Swing Over Cross Slide -------------------- 10.63
Swing Over Gap ---------------------------- 27.56"
Center Distance --------------------------- 40"
Width Of Bed ------------------------------ 13.5"
Cross Slide Travel ------------------------ 12"
Tool Slide Travel ------------------------- 5.5"
Spindle Nose ------------------------------ Camlock D1-6
Spindle Bore ------------------------------ 2.027"
Spindle Speeds ------ ( 24 ) -------------- 22.4 To 2000 Rpm
Main Drive Motor -------------------------- 8.8 Hp, 220/440/3/60
Longitudinal Feed ------------------------- 0.00197 To 0.252 Ipr
Cross Feed -------------------------------- 0.00984 To 0.126 Ipr
Range Of Metric Pitch --------------------- 0.05 To 40 Mm
Range Of Inch Threads --------------------- 1 To 80 Tpi
Range Of Module Pitch --------------------- 0.25 To 20
Range Of Diametral Pitch ------------------ 2 To 72
Tailstock Quill Taper --------------------- #5 M.T.
Tailstock Quill Travel -------------------- 7"
Tailstock Quill Diameter ------------------ 2.750"
Leadscrew Diameter ------------------------ 1.500"
Leadscrew Pitch --------------------------- 4 Tpi
Approximate Machine Weight ---------------- 3,600 Lbs