Doosan DN Solutions DBM2030 Double Column Vertical Machining Center (2022)

Doosan DN Solutions DBM2030 Double Column Vertical Machining Center (2022)
X-axis 3250mm (128”)
Y-axis - Working 2500mm (98.4”)
Y-axis - ATC Access 350mm (13.78”)
Y-axis - AAC Access 350mm (13.78”)
Z-axis [Extended Z Axis] 800mm (31.5”) [1100mm (43.3”)]
C axis 0-360o , 1 o
increments
Width between Columns 2500mm (98.4”)
Table to Spindle Nose - Standard 200-1000mm (7.87-39.4”)
Table to Spindle Nose - Riser 500-1300mm (19.69-51.2”)
Table to Spindle Nose – Riser, extended Z Travel 200-1300mm (7.87-51.2”)
TABLE:
Table Width 1500mm (59”)
Table Length 3000mm (118.1”)
Load Capacity 12000kg (26,400 lbs)
T-Slots 24H8 x 10 [28H8 x 10]
SPINDLE:
Type Built-In
Speed – Max RPM 8,000
Power – Max kW (HP) 55 (73.8)
Base Speed (RPM) 350
Torque – Max Nm (ft-lbs) 1009 (744.6)
Ram size 380x380mm (14.96x14.96”)
AUTOMATIC TOOL CHANGER:
Number of Tools 60
Tool Shank Cat 50 – Big-Plus Dual Contact Shank
Pull Stud Modified Cat 50
Tool Selection Fixed Address
Max. Tool Dia. 130mm (5.1")
With empty adjacent pockets 250mm (9.8")
Max. Tool Length 400mm (15.7")
Max. Tool Weight 30kg (66 lbs.)
Max. Tool Moment 29.4 Nm (21.7 ft-lbs.)
Tool Change – Vertical T-T-T 5.5 Sec’s
Tool Change – Vertical C-T-C 36 Sec’s
Tool Change – Horizontal T-T-T 6.0 Sec’s
Tool Change – Horizontal C-T-C 34 Sec’s
Tool Clamping Force 21,400 kg

LINEAR AXES:
Rapid Traverse X & Y axes 20m/min (787 IPM)
Rapid Traverse Z axis 15m/min (590 IPM)
Cutting Feed Rate X/Y & Z axes 10,000mm/min (394 IPM)
Least command increment 0.001mm (0.0001")
*Positioning accuracy per meter +/- 0.01mm (+/- 0.00039")
*Positioning accuracy per meter w optional linear scales +/- 0.007mm (+/- 0.00028")
*Positioning repeatability +/- 0.003mm (+/- 0.00012")
COOLANT SYSTEM:
HYDRAULIC:
Hydraulic tank capacity 105 L (27.6 gal.)
Discharge Pressure/Volume 90 Bar (1300 PSI)/ 25 L (6.5 gal)
LUBRICATION:
Way lubrication tank capacity 12 L (3.1 gal.)
SPINDLE COOLING:
Spindle bearing housing cooling oil chiller tank capacity 60 L (15.7 gal.)
Ballscrew support bearing oil chiller tank capacity 20 L (5.2 gal.)
GENERAL:
Length x Width 8800mm (346”) x 6930mm (273”)
Height [With 300mm Riser] 5100mm (201”) [5700mm (224”)]
Weight 32000kg (70400 lbs)
Power required 100 KVA / 265amp @ 220v
Voltage Required 205 - 235 Volts / 3 Phase
Air Pressure 5.4 bar (78 PSI)
Air Consumption 950NL/min (35 SCFM)
Current Electrical Arrangement 220/3/60
Video: https://youtube.com/shorts/VL_1SkK1UUE?feature=share