Hardinge T-42 MSY Big Bore Super Precision Lathe (2011)

Hardinge T-42 MSY Big Bore Super Precision Lathe (2012)
Max. X-Axis Travel 6.37” (161.8mm)
Max. Z-Axis Travel 16” (406.4mm)
Max. Y-Axis Travel 3.25” (82.55mm)
Continuous Z-Axis Thrust 1,500 lbs.
X-Axis Rapid Traverse Rates 945-ipm (24m/min)
Z-Axis Rapid Traverse Rates 1200-ipm (30.5m/min)
Y-Axis Rapid Traverse Rates 500-ipm (12.7m/min)
HARDINGE BMT LIVE TOOLING TOP PLATE
BMT bi-directional 16-station + ½ station
index
Square Shank 3/4” (20mm)
Round Shank Tooling 1.25” (32mm)
Index Time (rotation/including
clamp-unclamp)
.35/1.45 sec
Tool Shank Dia. w/ER 25 Collets .04 - .625” (1mm -16mm)
Live Tooling Power Rating (30 Min
Rating)
7.5-hp (5.5 kW)
Live Tooling Torque Rating (30 Min
Rating)
25 ft-lb (33 Nm)
Live Tooling Max Speed 8,000-rpm
Coolant Capacity 55 gallon (208 liter)
Max. Pressure 200 psi (13.8 bar)
Coolant Flow Rate (Per-Minute) 6.7 gallon (25.4 liters)
High Pressure Through Turret (Option)
1,000 psi (68.95 bar)
SUPER-PRECISION® ACCURACY & SURFACE FINISH SPECIFICATIONS
Overall Axis Repeatability (X, Z) .000030” (.76 micron)
Part Surface Finish 6 micro-inch (.15 micron) 8 micro-inch
Roundness .00001” (.25 micron) .00002”
Total Variation on Diameter .00012” (3 micron)
Program Resolution .00001” (.0001mm) .00001” (.0001mm)
Turret Indexing Repeatability .000060” / 1.52 micron .
POWER REQUIREMENTS (MSY CONFIGURATION)
Max. kVA/Full Load Amps 81 kVA/102FLA
Max. Voltage/Hz 400/50Hz, 460/60Hz 400/50Hz, 460/60Hz 400/50Hz, 460/60Hz
Lubrication Grease
Communication RS-232-C,
Length 98” (2489.2mm)
Depth 85.24” (2165mm)
Height (no stack light) 82.25” (2089mm)
Approx. Weight 13,100 lb (5940kg)
Approx. Shipping Weight 13,600 lb (6170kg)
Air Requirement 70 - 90 psi (4.8-6.2 bar) 70 - 90 psi