South Bend Turn-Nado EVS 14" x 40" Tool Room Engine Lathe (2005)

South Bend Turn-Nado EVS 14" x 40" Tool Room Engine Lathe (2005)

Swing Over Bed 14
Distance Between Centers 40
Max Weight Between Centers 660
Swing Over Cross Slide 8.375
Swing Over Saddle 13.78
Swing Over Gap 20.98
Maximum Tool Bit Size 3/4
Compound Travel 5.1
Carriage Travel 38.58
Cross Slide Travel 9
Threading Info:

Number of Longitudinal Feeds 17
Range of Longitudinal Feeds 0.002 – 0.067
Number of Cross Feeds 17
Range of Cross Feeds 0.001 – 0.034
Number of Inch Threads 45
Range of Inch Threads 2 – 72
Number of Metric Threads 39
Range of Metric Threads 0.2 – 14.0
Number of Diametral Pitches 21
Range of Diametral Pitches 8 – 44
Number of Modular Pitches 18
Range of Modular Pitches 0.3 – 3.5
Headstock Info:

Spindle Bore 2.0625
Spindle Taper MT#6
Spindle Type D1-6 Camlock
Spindle Bearings NSK or NTN Tapered Roller
Spindle Length 24-1/4
Spindle Length with 3-Jaw Chuck 30-1/4
Spindle Length with 4-Jaw Chuck 28-3/4
Spindle Length with Faceplate 26-1/4
Number of Spindle Speeds Variable
Spindle Speeds 20 – 2500
Tailstock Info:

Tailstock Taper MT#4
Tailstock Quill Travel 6
Tailstock Barrel Diameter 2.047
Demensions:

Bed Width 10-1/4
Floor to Center Height 42
Height With Leveling Jacks 43-1/2
Feed Rod Diameter 3/4
Carriage Leadscrew Diameter 1-1/8
Carriage Leadscrew Length 61-1/2
Leadscrew TPI 4 TPI
Faceplate Size 12
Steady Rest Capacity 5/16 – 4-5/16
Follow Rest Capacity 5/8 – 3-1/8
Construction:

Base Cast Iron
Bed Induction-Hardened, Precision-Ground Meehanite Cast Iron
Body Cast Iron
Headstock Cast Iron
End Gears Flame-Hardened Steel
Stand Cast Iron
Paint Type/Finish Urethane
Other / Fluid Capacities:

Headstock Capacity 16.9
Headstock Fluid Type ISO 32 (eg. Grizzly T23963, Mobil DTE Light)
Gearbox Capacity 1.4
Gearbox Fluid Type ISO 68 (eg. Grizzly T23962, Mobil Vactra 2)
Apron Capacity 1.2
Apron Fluid Type ISO 68 (eg. Grizzly T23962, Mobil Vactra 2)
Coolant Capacity 11.1
Electrical Info:

Power Requirement 440V, 3-Phase, 60 Hz