Hurco VMX60 Vertical Machining Center (2007)

Hurco VMX60 Vertical Machining Center (2007)

Table Working Surface - 66” x 26”
T Slots - 6 x 0.71”
T Slot Centres - 3.94”
Maximum load - 1500lb
Enclosed door opening - 64”
Spindle centre to column - 29.5”
Spindle nose to table Min/Max - 6”/30”

Spindle speeds - 0-1000 rpm
Spindle taper - BT40
Longitudinal travel - 60”
Cross travel - 26”
Vertical travel - 24”
Floor to table surface - 36”

Feed rate X/Y/Z - 300”/min
Rapids X/Y - 1181 “/min
Programming resolution - 0.0001”

Auto toolchanger - 24
Maximum tool dia. - 3.2”
Maximum tool dia (Adj sides empty) - 4.72”
Tool pocket pitch - 3.2”

Maximum Tool Length - 11.8”
Maximum Tool Weight - 15 lb.
Maximum Tool Weight in Magazine - 180 lb.
Adapter - ANSI Standard V-Flange

ATC Time
Tool to tool next station - 3 seconds
Chip-to-Chip - 2000 rpm 12” Z travel 7 seconds
Tool Selection System - Random pot, bi-directional, swing arm