Equipment
MACHINE TOOLS (CHIP MAKING)
Hones-Vertical
Sunnen HTA4100 Horizontal Hone (2015)
Sold

Sunnen HTA4100 Horizontal Hone (2015)

Hones-Vertical
Manufacturer:
SUNNEN
Model:
HTA-4100
Year:
2015
Stock #:
92225
Sunnen's HTA Series Horizontal Tube Hone is affordable and flexible yet has capabilities typically found in high-end systems such as a PLC-control with touch-screen interface for setting all machine parameters. The machine is easy to set up and operate, even by less skilled operators. All setups are accomplished through the control panel at the front of the machine. There is no need to remove covers or doors to set vertical carriage positions as in some other machines.
Mandrel Dia. (min)2.5"
Mandrel Dia. (max)21"
Stroke (max)13.5'
Horz/VertHorz

Sunnen HTA4100 Horizontal Hone (2015)

Spindle Speed:
20 – 300 RPM
Spindle Power:
3 Hp (2,24 kW)
Stroke:
1.5 Hp (1,12 kW)
Stroke Speed Range:
5 – 90 ft/min (1,52 – 2,74 m/min)
I.D. Diameter Range:
2.5 – 21 inches (64 – 533 mm)*
*For diameter sizes below 2.5 inches (64mm), contact your
Sunnen Field Engineer.
O.D. Diameter Range:
24 in. (610 mm) max
Approximate Stock Removal Rate:
8in3
/hr (130 cm3
/hour)*
*Steel material with conventional abrasives. Actual stock removal rates
will vary depending upon application.
Maximum Part Length:
HTA-2100 - 6.56 ft. (2 M)
HTA-4100 - 13.12 ft (4 M)
HTA-6100 - 19.7 ft (6 M)
Maximum Part Weight:
8,000 lbs (3630 kg)
Approximate Weight (includes coolant cart):
HTA-2100 – 3,190 lbs (1448 kg)
HTA-4100 – 3,865 lbs (1750 kg)
HTA-6100 - 4,580 lbs (2077 kg)
Electrical System:
400/460 V, 50/60 Hz, 3 phase, 15 amp
Designed in accordance with NEC/NFPA 79