Chiron FZ-08KS 5 Axis High-Speed Vertical Machining Center (2004)

Chiron FZ-08KS 5 Axis High-Speed Vertical Machining Center (2004)

X-Axis 17.71″
Y-Axis 10.62″
Z-Axis 11″
Maximum Bar Cap 1.25″ (32mm)
Drilling Cap in 1060 Steel w/Carbide Drill 0.63″
Tapping 0.5″
Milling Cap 1060 Steel 3.65 ci/min
Milling/Turning Tool Taper HSK A-40
Tool Diameter Maximum 1.9″ or 3.94″
Tool Length Maximum 6.3″
Tool Change Time Approx. 0.6s
Chip-to-chip Time Approx. 2.2s
Milling Spindle Speed 20 – 27,000 RPM
Spindle Bearing Diameter 1.57″
Tool Clamping Force 1012 lbf
Throat Distance – Spindle to Column 7.8″ – 18.5″
Distance – Spindle Nose to Table Surface 6.7″ – 17.7″
Thrust on X/Y-Axis 450 lbf
Thrust on Z-Axis
Thrust on X/Y-Axis 450 lbf 675 lbf
Accelerations:
X-Axis 23 ft/s²
Y-Axis 23 ft/s²
Z-Axis 33 ft/s²
Fixed Table Clamping Surface 30.3″ – 11.4″
Table Load CP 331
Weight 5,292 Lbs
High Speed Plus Drive:
Power – Maximum 5 HP
Torque – Maximum 6 ft lb
Rapid Traverse Rate X/Y/Z Axes 2953 ipm
Speed X/Y/Z Axes Maximum 33/49.2/65.6 ft/s²