Sharp 1118H Ultra Precision Tool Room ( HLV Type ) Engine Lathe (2017)

SPINDLE CAPACITY INCH METRIC
With Jaw Chucks 6 in. 150 mm
With Expanding Collets 3 in. 76 mm
With Round 5C Collets 1-1/16 in. 27 mm
With Step Chucks 1-1/16 - 6 in. 27 - 152 mm
GENERAL CAPACITY INCH METRIC
Swing Over Bed 11 in. 280 mm
Swing Over Cross Slide 6 in. 152 mm
Distance Between Centers 18 in. 457 mm
HEADSTOCK INCH METRIC
Spindle Speed 50 - 4000 rpm 50 - 4000 rpm
No. of Spindle Speeds
Variable (high/low)

Spindle Nose Diameter 2.19 in. 55.5 mm
Spindle Bore 1-1/4 in. 31.75 mm
Spindle Nose ID/OD 5C 10°/4° taper 5C 10°/4° taper
THREADS AND FEEDS

INCH METRIC
Threads / Number

11 - 108 tpi / 36

0.275 - 2.7 / 36

Longitudinal Feeds

0.31 - 7 ipr 8 - 178 mm/r
Cross Feeds 0.18 - 4 ipr 5 - 102 mm/r
Leadscrew Pitch, Diameter 8 tpi, 1 in. 8 tpi, 25.4 mm
CARRIAGE INCH METRIC
Cross Slide Travel 6 in. 152 mm
Compound Slide Travel 3 in. 76 mm
Quick Action Compound Travel 0.1 in. 2.5 mm
TAILSTOCK INCH METRIC
Quill Diameter 1.35 in. 34.5 mm
Quill Travel 3.75 in. 95 mm
Quill Center Taper MT #2 MT #2
GENERAL INCH METRIC
Spindle Motor 5 HP 3.7 KW
Voltage 220V, 440V
Phase 3 Ph (no 1 Ph)
Coolant Pump Motor 0.167 HP 0.124 Kw
Carriage Feed Motor (DC)
½ HP, 220V

0.37 Kw

Approximate Weight 1804 lbs 820 Kg
Dimensions 6.07 x 2.46 x 5.58 ft. 1.85 x 0.75 x 1.70 M
All specifications subject to change without notice. Please call to verify.