$75000 for quick sale (2012) Cincinnati CL-920 CNC Fiber Laser

CINCINNATI CL-920 CNC Fiber Laser
4-2EM-552 (R-11/15)
CUTTING RANGE
MODEL X-AXIS Y-AXIS Z-AXIS
5 X 10 0 TO 120 in
(0 TO 3048 mm
0 to 60 in
(0 to 1524 mm) 0 to 1.5
in. (0 to
38 mm)
above
each
pallet
6 X 12 0 to 157.5 in.
(0 to 4000 mm)
0 to 78.75 in
(0 to 2000 mm)
8 X 20 0 to 240 in.
(0 to 6096 mm)
0 to 98.5 in.
(0 to 2500 mm)
ACCURACIES:
♦ Absolute Positioning (X and Y-axis): ±0.001 inch
(0.025 mm)
♦ Repeatability (X and Y-axis): .001 inch (0.025 mm)
MACHINE SPEEDS (Programmed moves):
♦ Cutting feed rate is programmable up to the Rapid
Traverse Speed. Maximum feed rate depends on
material type and thickness.
♦ Rapid Traverse Speeds
X and Y-axis: 8500 IPM (3.6 m/sec.)
X and Y-axis Simultaneous: 12020 IPM (5.1 m/min.)
Z-axis: 1700 IPM (0.7 m/sec.)
♦ Accelerations
X and Y-axis: 5 X 10: 1.65 G (16.2 m/sec2)
X and Y-axis: 6 X 12: 1.50 G (14.7 m/sec2)
Z-axis: 2.00 G (19.6 m/sec2)
MACHINE SPEEDS (In JOG Mode):
♦ Normal jog (X and Y-axes): 300 IPM (0.1 m/sec.)
♦ Rapid traverse jog (X and Y-axes): 1200 IPM
(0.5 m/sec.)
♦ Z-axis Speed: 250 IPM (0.1 m/sec.)
PROGRAMMABLE ASSIST GASES: Three
PROGRAMMABLE ASSIST GAS PRESSURE:
5-200 PSIG (34 to 1379 kPa) for Oxygen and 5-500
PSIG (34 to 3447 kPa) for Nitrogen and Air.