DMG MORI DMU 50 eVo Linear 5 Axis Machining Center (2007)

DMG MORI DMU 50 eVo Linear 5 Axis Machining Center (2007)

Traverse path X (longitudinal).......................... 19.7" (500 mm)
Traverse path Y (across)................................ 17.7" (450 mm)
Traverse path Z (vertical).............................. 15.7" (400 mm)

-MAIN DRIVE-
AC-motor spindle (40/100% DC)............................. 46.9/33.5 hp
Spindle speed............................................... 18,000 rpm
Torque (40/100% DC)................................... 95.9/64.2 ft/lbs
Spindle bearing diameter (front/rear)........... 2.16"/1.97" (55/50 mm)
Working spindle, tool fitting.................................. HSK-A63

-FEED DRIVES-
Rapid traverse linear axes X/Y/Z 3,149.6/1,968.5/1,968.5ipm(80/50/50m/min)
Feed velocity linear axes X/Y/Z................... 787.4 ipm (20 m/min)
Feed power X/Y/Z.................................... 1,124 ft/lb (5 kN)

-TOOL MAGAZINE-
Storage pockets 60 positions with tool taper cleaning inside tool magazine

-NC SWIVEL ROTARY TABLE-
Clamping surface.......................... 19.7" x 15.0" (500 x 380 mm)
Swivel range B-axis...................................... 0-108 degrees
Rotation range C-axis.................................... 0-360 degrees
Rapid traverse rotary axis B/C............................... 40/50 rpm
Maximum table load..................................... 441 lb (200 kg)
Table measuring system.......................................... Direct
Table cooling........................... Drive cooling for B and C axis

-EQUIPPED WITH-
Linear drive in the X-Axis
Ballscrew drives in the Y & Z-Axes

BLUM Laser tool measuring of tool length and diameter, also detects broken
tools

Preparation for infrared parts measuring touch probe

PRODUCTION PACKAGE consisting of:
-Chip conveyor

-Internal coolant supply (ICS) thru the spindle
-With paper band type filter
-580 psi (40 bar) pressure
-6 gallon/min (23 l/min) flow rate
-160 gallon (600 l) coolant tank
-Visiport rotating clear-view window on front door
-Air purge for linear measuring system

Fully enclosed protection cabin

BEMA programmable coolant nozzles

Preparation for automation with guillotine door on left side of machine