CYRIL BATH V20-300 Stretch Wrap Forming Press

CYRIL BATH V20-300 Stretch Wrap Forming Press

Tension cylinders
Maximum Tension Force each side 20 tons (178 kN)
Maximum Stroke of Tension Cylinders (each)  30 in ( 762 mm)
Maximum Distance between Jaws (tension cylinders fully retracted) ≥ 300 in (7620 mm)
Minimum Distance between jaws (tension cylinders fully extended) ≤ 6 in (152.4 mm)
Tension cylinders Oscillation (on the horizontal plane) ± 30°
Set-Up & Forming Speed (Infinitely Variable) 1 to 30 IPM (0.42 to 12.7 mm/s)
Repeatability ± 0.012 in (± 0.3 mm)
Tension cylinder carriage motion 117 in (2972 mm) Swing arms
Forward / Backward Travel 10° / 90°
Total Travel 100°
Repeatability ± 0.1°
Set-Up & Forming Speed (Infinitely Variable) From 0.5 to 3°/sec
Returning speed 3°/sec
Minimum tool length for bending at 180° @ full tonnage 16 in (406 mm)
Maximum tool length for bending at 180° @ full tonnage 80 in (2032 mm) Die Table
Die mounting area (Length × Width) 84” × 50” (2130 ×1270)
Quantity of die posts supplied (tool holders) Qty. 2
Height between the floor to table top 37.5 in (952.5 mm) JAWS
Jaws Type Taper Lock (conical)
Inner Diameter of Jaws holder assembly 4”, 6” & 8” (101; 1 Set each
Axial Rotation (Manual): ±180° (360° Total)
Height between the Jaw centerline to table top 10.5 in (267 mm)
Cross-slide adjustment 12 in (305 mm) Machine weight and dimensions
Approximate Width of the Press Arms Open  12 m
Length of the Press (Piping Excluded)  6 m
Pit Depth No pit required
Machine Weight  12 T