OKK HM-80S Horizontal Machining Center

Axis travel-X 1000 mm (39.37"), Y 850 mm (33.46"), Z 820 mm (32.29")- 2-800 mm (31.5") square pallets on a rotary APC, 1 degree indexing table-Maximum work piece is 1000 mm (39.37") swing diameter by 880 mm (34.65")-Table load capacity 1,100 kg (2,425 lbs.)-60 tool capacity-Cat 50 spindle taper with 454.7 kg (1000 lbs.) through the spindle coolant-Max tool diameter 230mm (9.06") 115 mm (4.53" diameter without adjacent tools) x 450 mm (17.72") Maximum length-Max tool weight 25kg. (55.12 lbs.)-Max spindle motor output 22 kW / 18.5 kW-(25 hp. continuous) / (30 hp. 30 minutes). Maximum spindle speed 13,000 rpm.-40m/minute (1574 IPM) Feed rate 1mm/min. to 20000mm/min.(0.039 to 787 IPM) in feed-hand held coolant gun-Fanuc 16iM control with 4 axis simultaneous positioning and linear interpolation, helical interpolation, extended memory, (1280 meters),rigid tapping, PC card slot, 48 additional offsets, tool life management, coordinate rotation, custom macro. C chip conveyor.