Okuma & Howa 2SP-V80 Twin Spindle Vertical Turning Center

2005 Okuma & Howa 2SP-V80 Twin Spindle Vertical Turning Center in Very Good Condition
with 31.5" 3-Jaw Chucks, 2 Rear Discharge Chip Conveyors
2- Auto Doors and 2-Speed Gearbox Motors! Spindle Right Side 12,782 Cutting Hours Left Side 14,786.
* Fully Installed for Inspection Wilkes Barre, PA. Shop.

Okuma & Howa Factory Main Specifications:

Max. Cutting Diameter 31.50" - 39.9"

Max. Swing Diameter 39.37"

Max. Cutting Length 33.07"

Spindle Center Height From Floor 45.28"

Spindle

Spindle Motor (FANUC aP60) 50 HP 2-Speed Gear Box Motors * Excellent Hard Materials!

Spindle Speed Range 10 - 1,250 RPM

Max. Chuck Diameter Standard 24"3 Jaw * Optional Cap. 28"- 36" Diameters!

Spindle Nose A2-11

Front Bearing Diameter 7.87"

Max. Weight on Spindle 1,764 lbs. (must include chuck, parts and jaws)

Spindle Bearings Double Row Cylindrical and Angular Contact

Spindle Speed Selection Direct RPM Programming 2-Speed High-Low Range

Spindle Speed Override 50% - 200%

Speed Range Shift 2- Speed Gear Box Programmable High-Low Range

Axis Drives

X Axis Travel (FANUC a22/3000i AC 4.0 HP) 18.31"

Z Axis Travel (FANUC a22/3000iB AC 5.0 HP) 33.07"

C-Axis Live Tooling

X Axis Thrust Force 2,950 lbs.

Z Axis Thrust Force 3,170 lbs.

X Axis Ballscrew Diameter/Pitch 1.57"/ 0.47"

Z Axis Ballscrew Diameter/Pitch 1.97"/ 0.47"

X & Z Axis Rapid Traverse Rate 630 IPM

Feedrates 0.00001 - 18.18 IPR

Feedrate Override 0 - 200%

Cooling System for Ballscrews (to minimize expansion) Forced Oil

Turret

Turret Type V12

Max. Number of Tools 12

Curvic Coupling Diameter 11.42"

Clamping Force 12,590 lbs.

Indexing Time (station to station) 0.7 sec

Standard Turning Tool Size 1.25" x 1.25"

Max. Boring Bar Size 2.0" & 2.5"

Machine Electric 85 KVA (200v) Transformers

Hydraulic Motor AC 1.5 Kw

Slide way Lubrication Pump Motor AC 20w

Coolant Pump Motor: Turret (SPK2-8/8; 57 psi/ 8 gpm) AC 550w

Coolant Pump Motor: Wash (CHK4-60/2; 14 psi/31.5 gpm) AC 620w

Machine Light AC 100v-20w

Reservoirs:

Hydraulic Tank 10.6 gal

Slideway Lubrication Tank 1.59 gal

Coolant Tank 118 gal

Machine:

Height 13.3' (160.0")

Floor Space Requirement 8.0' x 9.0' (96.0" x 108.0")

Weight 50,600 lbs. 2-Speed Gearbox Heavier Model

Automatic Open/Close Splash Guard Chip Conveyor Both Machines (Rear Discharge)

Chuck Cylinders – Chuck Open/Close Direction Change (key switch)

Chuck Open/Close Confirmation (Prox. Switches) Memory Protect Key Switch

One Color Signal Tower Chuck Open/Close (Push Button)

Cycle Completion Alarm & Light Door Interlock

High Pressure Coolant (57 psi) Mounting Plates and Leveling Screws

Multi-tap Transformer Tool/Work Counter on Screen

Spindle Orientation High Pressure Coolant 120 psi

All Ways are induction hardened to Rockwell C55. All Ways are ‘Box’ for maximum rigidity and strength.

Okuma machines use a design that allows the Z-Axis drive to be mounted to the bed of the machine.

This design guarantees perfect alignment of turret to spindle and increases the rigidity of the Z-Axis itself.

Includes:

2- 31.5" 3-Jaw Chucks Installed on Machine 20k New Option Costs.

2- Rear Discharge Lift-Up Chip Conveyors Chain Type

2-Auto Doors Each Side of Machine

Coolant Tanks and all Pumps

2- QTS Quick Tool Setters are Built in Z-Axis Guarding