30" x 16" x 20" Haas Model VF-2 4 Axis Vertical Machining Center (2014)

Haas Model VF-2 4 Axis Vertical Machining Center
X Axis 30 " 762 mm
Y Axis 16 " 406 mm
Z Axis 20 " 508 mm
Spindle Nose to Table (\ max) 24 " 610 mm
Spindle Nose to Table (\ min) 4 " 102 mm
TABLE S.A.E. METRIC
Length 36 " 914 mm
Width 14 " 356 mm
T-Slot Width 5/8 " 16 mm
T-Slot Center Distance 4.92 " 125.0 mm
Number of Std T-Slots 3 3
Max Weight on Table (evenly distributed) 3000 lb 1361 kg
SPINDLE S.A.E. METRIC
Max Rating 30 hp 22.4 kW
Max Speed 8100 rpm 8100 rpm
Max Torque 90 ft-lb @ 2000 rpm 122 Nm @ 2000 rpm
Drive System Inline Direct-Drive Inline Direct-Drive
Max Torque w/opt Gearbox 250 ft-lb @ 450 rpm 339 Nm @ 450 rpm
Taper CT 40
Bearing Lubrication Air/Oil Injection Air/Oil Injection
Cooling Liquid Cooled Liquid Cooled
FEEDRATES S.A.E. METRIC
Rapids on X 1000 in/min 25.4 m/min
Rapids on Y 1000 in/min 25.4 m/min
Rapids on Z 1000 in/min 25.4 m/min
Max Cutting 650 in/min 16.5 m/min
AXIS MOTORS S.A.E. METRIC
Max Thrust X 2550 lb 11343 N
Max Thrust Y 2550 lb 11343 N
Max Thrust Z 4200 lb 18683 N
TOOL CHANGER S.A.E. METRIC
Type Carousel (SMTC Optional) Carousel (SMTC Optional)
Capacity 20 20
Max Tool Diameter (full) 3.5 " 89 mm
Max Tool Weight 12 lb 5.4 kg
Tool-to-Tool (avg) 4.2 sec 4.2 sec
Chip-to-Chip (avg) 4.5 sec 4.5 sec
GENERAL S.A.E. METRIC
Air Required 4 scfm, 100 psi 113 L/min, 6.9 bar
Coolant Capacity 55 gal 208 L
Equipped With:
Wired for 4th Axis