15" Doosan / Daewoo Model V550M CNC Vertical Turning Center (2004)

Doosan Model V550M CNC Vertical Turning Center
Max Swing: 31.5"
Swing over carriage (X-Axis): 19.3"
Max. Turning Diameter: 30.3"
Maximum work length (to approximate jaw center of N-15 chuck): 29"
Maximum permissible weight (including chuck): 1,433 lbs
Spindle nose: ASA-A2-11
Spindle bearing diameter (I.D.): 6.3"
AC spindle motor (30 min rating): 50 Hp
Spindle speed range: 20 - 2,000 RPM
Speed ranges: 2
Spindle torque (30 min rating): 2,033 ft-lbs
X axis travel: 19.3"
Z axis travel: 31.0"
X axis guideway span: 15.2"
Z axis guideway span: 24.8"
X axis ball screw diameter: 1.6"
Z axis ball screw diameter: 2.0"
X axis rapid traverse rate: 472 IPM
Z axis rapid traverse rate: 630 IPM
Maximum feed rate: 236 IPM
X axis feed thrust (continuous/intermittent): 1,478 / 2,216 lbs
Spindle Speed: 20 - 2000 RPM
Live Milling Speed: 3000 RPM
Spindle Motor: 50 HP
Live Milling Motor: 15 HP
Turret Positions: 12
Turning tool shank size: 1" square
Boring bar diameter: 2.5"
Turret index time(next station swivel time): 0.25 sec.
Tool selection: Bi-directional
Tool type: BMT 75P
Number of rotating tool stations: 12
Rotating tool RPM: 30 - 3,000 RPM
Maximum revolving tool shank size: 1.0"
Rotating tool spindle motor (10 min. rating): 15 Hp
Rotating tool torque (10 min. rating): 103 ft-lbs.
Rotating tool collet type: ER40
Minimum programmable angle: (degrees) .001
Rapid traverse rate (RPM): 50
Indexing repeatability: +/- .006 deg.
Indexing positioning accuracy: .0167 deg.
Equipped With:
15" 3-Jaw Hydraulic Chuck
Fanuc 21iTB CNC Controls
(3) Live Tool Holders
Mist Collector
2 Speed Gearbox
Face and Side Milling, Drilling and Tapping Capabilities
12 Station BMT 75 Turret with All Stations Accepting Rotating Tools
Programmable High - Low Chucking Pressure
Chip Conveyor
Stainless Steel Way Covers