6" x 18" DOALL VS-618-2 3 Axis Hydraulic Surface Grinder (1980)

DOALL VS-618-2 3 Axis Hydraulic Surface Grinder
Magnetic chuck area: 18" (L to R) X 6" (F to B)
Table Working Surface, W x L........... 6" x 18"
Grinding Wheel, Maximum Diameter....... 8"
Grinding Wheel, Width.................. 1/2"
Grinding Wheel, Hole Diameter.......... 1-1/4"
Longitudinal Table Feeds, Range........ 5 to 125 FPM
Cross Table In-Feeds, Range............ 0 to .250 IPM
Grinding Wheel Spindle Motor........... 1 HP/3450 RPM
Hydraulic System Motor................. 1.5 HP/1735 RPM
Overall Dimensions, L x D.............. 90" x 69"
Weight, Approximately.................. 2500 LBS.
Equipped With
¯
All Hydraulic Feeds
Incremental Down Feed
Coolant Tank(wet surface grinder)
6" x 18" Electro Magnetic Chuck