8" x 20" Jones & Shipman Kellenberger Model 524 Easy CNC Surface Grinder (2012)

Jones & Shipman Kellenberger Model 524 Easy CNC Surface Grinder
Table Size 8" X 20"
Wheelhead Vertical Movement - Maximum 15.78"
Distance Between Table & Grinding Wheel 10.86"
Table Load Capacity 350 Lbs.
X-Axis Table Travel - Hydraulic 19.69"
X-Axis Table Travel - Hand feed 24"
X-Axis Traverse Rate 36 - 984 IPM
X-Axis Traverse Rate - Override 240 - 1200 IPM
X-Axis Jog Rate 36 - 240 IPM
Y-Axis Feed - Minimum Programmable Increment .0001"
Y-Axis Feed Rate 0.06 - 3000 mm/Min.
Y-Axis Electronic Handwheel - Switchable 0.0001,0.001,0.01,0.1 Steps
Z-Axis Table Crossfeed Travel - Ball Screw 7.87"
Z-Axis Feed Rate 0.06 - 3000 mm/Min.
Z-Axis Programmable Increment - Minimum .0001" Resolution
Spark-Out Passes - Maximum 0 - 999
Grinding Wheel - Diameter x Width 10" x 1"
Grinding Wheel - Bore 3"
Grinding Wheel - Speed 1000 - 4000 RPM Variable
Grinding Wheel - Motor 3 HP
Equipped with:
GE Fanuc CNC, Quick-Panel Jr. Control Interface
Set Up For Graphite
Manual Cycles: Dress & Grinding
CNC Dressing Cycles: Straight, Slotting, Facing, Vee, Special
CNC Grinding Cycles: Slot, Area, Front, Back, Slot & Front, Slot & Bac
8" x 20" Walker Magnetic Chuck
Coolant Filtration System with Paper Media Separator
Table Mounted 3-position, Diamond Wheel Dresser
--- The above equipped with is subject to confirmation