8" chuck Haas Model ST-20SS 2 Axis Slant Bed CNC Lathe (2011)

Haas Model ST-20SS 2 Axis Slant Bed CNC Lathe
Over Front Apron: 31.75 " 806 mm
Over Cross Slide: 20.75 " 527 mm
Over Tailstock: 23.0 " 584 mm
CAPACITIES: S.A.E. METRIC
Chuck Size: 8.3 " 210 mm
Max Cutting Diameter (varies with turret): 10.0 " 254 mm
Max Cutting Length (without workholding): 21 " 533 mm
Bar Capacity: 2.0 " 51 mm
TRAVELS & FEEDRATES: S.A.E. METRIC
X Axis: 9.3 " 236 mm
Z Axis: 21.0 " 533 mm
Rapids on X: 945 in/min 24.0 m/min
Rapids on Z: 1200 in/min 30.5 m/min
Max Thrust X: 4100 lb 18238 N
Max Thrust Z: 4050 lb 18015 N
SPINDLE: S.A.E. METRIC
Max Rating: 30 hp 22.4 kW
Max Speed: 5000 rpm 5000 rpm
Max Torque: 140 ft-lb @ 1450 rpm 190 Nm @ 1450 rpm
Spindle Nose: A2-6 A2-6
Spindle Bore: 3.50 " 88.9 mm
TURRET: S.A.E. METRIC
Number of Tools: 24 Stations 24 Stations
OD vs ID Tools: Hybrid 12 BOT/12 VDI Hybrid 12 BOT/12 VDI
Boring Bar Rear Clearance (from back of turret ): 4.0 " 102 mm
GENERAL: S.A.E. METRIC
Air Required: 4 scfm, 100 psi 113 L/min, 6.9 bar
Main Motor Drive: 30HP
Coolant Capacity: 55 gal 208 L
Equipped with
Haas CNC Control
Chip Conveyor
Servo Auto Door
Auto Jet Blast
Internal High Voltage Isolation Transformer
Intuitive Programming
Vector Drive 5000 RPM Spindl
8" 3 Jaw Chuck
24 Station VDI Turret
Rigid Tap
USB Port
Hours
Motion time/Spindle Time: 5125/4594