Mitsui-Seiki Model GSN-300 CNC Thread Grinder

Mitsui-Seiki Model GSN-300 CNC Thread Grinder
Maximum Diameter Swing over Table: 10.63"
Distance between Centers: 17.72"
Maximum Thread Length Ground: 11.81"
Maximum Outside Diameter Ground: 3.15"
Thread Lead Obtainable (Maximum): 2.36"
Grinding Wheel Size (OD x Width x Bore): 14" x 0.4" - 1.26" x 6"
Wheel Spindle Speeds (2 by changing pulleys & belts): 1790 RPM / 2420 M
Helix Angle: 30
Full Travel Length: 5.4"
Travel Length by Rapid Feed (Hydraulic): 0.985"
Total Feed Amount & Automatic Feed: 0.0001"
Total Feed Amount (Automatic Feed): 0.9999"
Maximum Feed at Stroke End (Automatic Feed): 0.9999"
Minimum Feed at Stroke End (Automatic Feed): 0.0001"
Full Travel Length: 14.17"
Travel per Step: .00001"
Lead Setting Range: 0.01" - 2.36"
Rapid Return Speed (with no spindle rotation): 1000 mm/min
WORK SPINDLE (X-Axis)
Spindle Nose: No. 5 MT
Center Taper: No. 3 MT
Hole thru Spindle: 1.38"
Work Spindle Speeds (Stepless): 100 RPM (maximum)
Angle of Spindle Rotation per step: .005
Center Taper: No. 3 MT
Axis Travel Length: 1" Maximum
Equipped With
Fanuc 11 CNC Control