108" x 354" Poreba TCG-200 Heavy Duty Engine Lathe

Poreba TCG-200 108" x 354" Heavy Duty Engine Lathe
Machine Has Been Raised To Swing 108" Original Swing 79"
Maximum Swing Over Bed Ways --------------- 108"
Maximum Swing Over Saddle, Approx. -------- 80"
Maximum Distance Between Centers ---------- 354"
Maximum Workpiece Weight Between Centers -- 66,000 Lbs.
Maximum Workpiece Weight With 2 Steadies -- 88,000 Lbs.
Hole Thru Spindle ------------------------- 4-1/8"
Spindle Speeds ---------- ( 24 ) ---------- 1/2 To 100 Rpm
Bed Width --------------------------------- 43" ( 2 Bedway )
20 Feed Rates ----------- ( Longitudinal ) .007 To 19 Ipr
Rapid Traverse ---------------------------- 157 Ipm
Inch Threads, Saddle ---- ( 96 ) ---------- 1/8 To 30 Tpi
Inch Threads, Top Slide ------------------- 1/32 To 7-1/2 Tpi
Metric Threads, Saddle -- ( 81 ) ---------- 1 To 192 Mm/Rev.
Metric Threads, Top Slide ----------------- 1/4 To 48 Mm/Rev.
Main Drive Motor -------------------------- 100 Hp A.C.
Equipped With ---
80" 4-Jaw Chuck
(3) Heavy Duty Roller Steady Rests
( 43" Cap. 31" Cap., 23" Cap. )
Inch/Metric Threading
Hardened & Ground Bedways
Hardened & Ground Gears & Spline Shafts
Heavy Duty Meehanite Casting
Tool Post
Power Top Compound Slide
Power Rapid Traverse To All Directions
Taper Turning On Carriage From Power Compound
Power Driven Tailstock ( Body & Quill )
Control Station
Extra 14 Bed Section