24" Bryant Universal Internal Grinder

Bryant 24" Universal Internal Grinder
Max. swing, inside std. chuck guard: 16 in.
Max. swing over table w/o chuck guard: 23 in.
Max. swing, workhead swiveled: 12 in.
Angular adj. of workhead: 180 deg.
Wheelslide crossfeed travel: 1 1/2 in.
Workhead cross slide travel: 15 1/2 in.
Max. table travel: 20 in.
Max. grinding stroke: 16 in.
Min. grinding stroke: 1/8 in.
Center of workhead, spindle to floor: 46 in.
Workhead spindle flange 6 in. Type D1 ASA
standard CM Lock Spindle Nose
Speeds & Feeds
Table Speeds: to 25 F.P.M.
Workhead speed (reversible)
Variable from 50-425 R.P.M.
Power Crossfeed increments (on. Dia.): .00025 to .001
One turn of crossfeed handwheel (on dia.): .050
One turn of workslide handwheel: .125
Motors
Pump motor 3 HP 1800 RPM at 60 cycles
Hyd. & drive motor 135-1175 RPM
Wheelhead motor, 5 HP 3600 RPM
Coolant pump motor, 1/4 HP 1800 RPM at 60 cycles
Tank capacities
Oil Tank 30 gal.
Coolant tank 50 gal.
Equipped With
12000 RPM Bryant Internal Grinding Spindle WH-HD-E9910M8-2-24
Dresser
Work Light
Vickers Flow Control Valve
440 Volt/3 Phase/ 60 Cycle
Newall Digital Read Out (,644) Additional Cost