21" x 120" Clausing Colcheter Model 21" 600 Gap Bed Engine Lathe (1998)

Clausing Colcheter Model 21" 600 21" x 120" Gap Bed Engine Lathe
Swing over bed: 21.81" (554mm)
Swing in gap: 32.68" (830mm)
Width in front of faceplate: 8.5" (216mm)
Swing over cross slide: 14.57" (370mm)
Bedway width: 15.75" (400mm)
Spindle bore: 4.09" (104mm)
Spindle nose (camlock): D1-11
Spindle nose taper: 5MT
Number of spindle speeds: 3 infinitely variable
Spindle Speed Range (rpm): 18-1800
Low range (rpm): 18-200
Mid range (rpm): 55-605
High range (rpm): 100-1800
Cross/Top Slide
Travel of cross slide: 11.81" (249mm)
Width of cross slide: 8" (203mm)
Travel of top slide: 7.5" (190mm)
Width of top side: 4" (102mm)
Tailstock
Quill travel: 5.7" (145mm)
Quill Diameter: 3.74" (95mm)
Quill taper: 6MT
Feeds and Threading
Longitudinal feed range (in): 0.0016 - 0.11in/rev
(mm): .041 - 2.79mm/rev
Cross feed range (in): 0.0008 - 0.055in/rev
(mm): 0.02 - 1.4mm/rev
Number of inch pitches: 73
Range of inch pitches: 2 - 84 TPI
Number of metric pitches: 27
Range of metric pitches: 0.2 - 14mm
Number of diametral pitches: 27
Range of diametral pitches: 8 - 72 DP
Number of module pitches: 51
Range of module pitches: 0.2 - 3.5 MOD
Motor
Spindle motor: 15 hp (10kw)
Equipped With
Taper Attachment
3 Jaw Chuck
Quick Change Tool Post