18" X 54" American Pacemaker Geared Head Engine Lathe

American Pacemaker 18" X 54" Engine Lathe
Swing Over Bed Ways: 18"
Swing Over Carriage: 13"
Distance Between Centers: 54"
Spindle Speeds: 20 to 1200 RPM (18)
Main Drive Motor: 8 HP
Threading Capacity: 60TPI to 1TPI
Current Electrical Arrangement: 240/3/60
Equipped with:
#5 Morse Tailstock Taper
Gear Driven Head
Replaced All Oil Glasses
Revolving Handles Installed on Cross Slide, Carriage and Tailstock
Hand Wheels
Installed New Way Wipers on Carriage "V" Ways
Re-Knurled Cross Slide Lock Ring
Changed Headstock Oil and Cleaned Filter
File Showing Restoration "Hit List" History
15" Diameter 4 Jaw Chuck With Wrenches
12"Diameter 3 Jaw Bison with Hardened Master Jaws and Reversible Hardeneds
Box Wrench for Tool Post
Open End Wrench for Compound Lock
Tailstock Box Wrench
Carriage (5/8" Square) Lock Wrench
Owners/Parts Maintenance Manuals
8 Piece Leveling Pucks (Steel)
Spanner Wrench For Chuck Removal
4" Square Aloris Tool Post
Spindle Motor is Reversible For Tapping Purposes
Has Taper Attachment (Original With Machine) Made By American
Cross Slide Screw and Nut are in Near New Condition
Half Nut is in Near New Condition
Has Feed Cut Off Collars On Carriage Drive Screw
Has Adjustable Spindle Tapered Router Bearings With Accessibility From
Outside of Machine
Has Hardened Detachable V Ways, Solid Tool Steel, Ground to Precision
Gauge Tolerances
Made From A Mixture of Cast Iron and Steel, Producing A "Semi-Steel" of
40,000PSI Tensile Strength
Spindle Gears in Higher Speeds Are 20 Helical Gears
Spindle Nose L2 Tapered Keyed Drive
Painted Machine Grey with 2 Part Urethane Cleat Coat
(Automotive Type Quality)
Wired 240 Volt, 3 Phase
Total Weight Approximately 8000lb