20" chuck Doosan Daewoo Puma 700M Live Tool CNC Turning Center (2005)

Doosan Daewoo Model Puma 700M CNC Turning Center
X-axis travel: 18.5"
Z-axis travel: 65"
Maximum turning diameter: 35.4"
Distance between centers: 76.8"
Spindle speed: 3 - 1,500 RPM
Spindle nose: A1-15
Draw tube I.D.: 6.55"
Number of tools: 12
Turning tool shank size: 1.25"
Boring bar diameter: 3.0"
Rotating tool RPM: 30 - 3,000 RPM
Rotating tool spindle motor: 15 HP
Rotating tool torque: 103.5 ft-lbs
Rotating tool holder type: BMT 85
Rotating tool collet type: ER 50
Milling collet capacity: 1/4" to 1 3/8"
Tailstock quill diameter: 6.3"
Tailstock quill stroke (programmable): 5.9"
Max tailstock quill thrust / max hydraulic pressure: 7,150 lbs / 580 PSI
Prog. tailstock body stroke: 61"
Tailstock spindle taper (built-in type) MT #6
Equipped with:
Fanuc 21iTB CNC Control
145 PSI Coolant Pump
20" Schunk Chuck
3 Live tool holders (X)
4 Live tool holders (Z)
Collet chuck hardinge S-50 master with 8 sets of pads
11 sets of aluminum pie jaws
14 sets of steel jaws
6 turning holders
5 drilling or boring holders
Powerful 60 HP spindle motor
Large spindle bore
High speed spindle
Programmable high / low chucking pressure
Heavy duty, non lifting, bi-directional turret
Fast 0.35 second turret indexing
One-piece 45 degree torque-tube slant bed
Geared headstock
Solid box way construction
Fluroplastic anti-friction mating way surfaces
Separate coolant tank
Double anchor pretensioned X and Z axis ball screws
Fast 630 IPM rapid traverse (400 IPM on long bed)
Programmable tailstock body and quill
Automatic tool setter
Heavy duty tailstock with built-in center
Torque limiter ball screw protection
Up to 9,580 pounds of Z axis thrust
Large 35.4" turning diameter
65 PSI coolant system
Metered piston distributor lubrication
Way lube separation system
Chip conveyor
Face and side milling, drilling and tapping capabilities