20" X 80" Tos Model SN-50C Engine Lathe (2005)

Tos Model SN-50C 20" X 80" Gap Bad Engine Lathe
Swing Over Bed: 20"
Swing Over Carriage: 10.6"
Center Distance: 80"
Spindle Bore: 2-1/8"
Spindle Speeds: 22 - 2,000 RPM
Maximum weight of workpiece, (300 kg): 660 Lbs
Width of gap in front of faceplate: 9.05"
Width of bed: 13.38"
Main motor: 7.5 HP
Longitudinal feeds: 0.002 - 0.242 IPR
Cross feeds: 0.001 - 0.012 IPR
Threads: 1-80 IPM
Leadscrew - diameter: 1.57"
Leadscrew - pitch: 1/4"
Rapid traverse - cross, (1500mm/min): 60 IPM
longitudinal: (3000mm/min) 120 IPM
Equipped With:
3-Jaw Chuck
4-Jaw Chuck
Tailstock
Quick Change Tool Post
Steady Rest
Power Rapid Traverse
**** Less than 100 hours ****