8" chuck Daewoo Model Puma 2500 LSY Live Tool. Sub. Y-Axis CNC Turning Center (2005)

Daewoo Model Puma 2500 LSY Live Tool, Sub, Y-Axis CNC Turning Center
Swing Over Bed: 23.6"
Swing Over Carriage: 21.6"
Maximum Bar Capacity: 3"
Maximum Turning Diameter (Main Spindle): 13"
Distance Between Main & Subspindle Nose: 43.7"
X-Axis Travel: 9.84"
Z-Axis Travel: 32.6"
Angle of Slant Bed: 30A
X-Axis Rapid Traverse Rate: 790 IPM
Z-Axis Rapid Traverse Rate: 945 IPM
X and Z-Axis Ball Screw Diameter: 1.3"
-MAIN SPINDLE-
Chuck Size: 10"
Spindle Speed: 35 - 3500 RPM
Spindle Bore Diameter: 3.4"
Spindle Motor: 30 HP
Maximum Spindle Torque: 319 ft/lb
-SUB SPINDLE-
Chuck Size: 8"
B-Axis Travel: 32.7"
Sub-Spindle Guideway Span: 9.8"
Spindle Speed: 60 - 6000 RPM
Spindle Bore Dia.: 1.77"
Spindle HP: 10 HP
Rapid Traverse Rate: 787 IPM
Minimum Angle: .001 DEG
-MAIN SPINDLE C-AXIS-
Rapid Traverse Rate: 200 RPM
C-Axis Minimum Angle: .001 DEG
-TURRET & ROTATING TOOLS-
Number of Turret Stations: 12
Boring Bar Diameter (Main Spindle): 1.5"
Boring Bar Diameter (Sub Spindle): 1"
Turret Index Time: .1 sec.
Tool Holder Type: BMT 55
Rotating Tool RPM: 50 - 5000 RPM
Rotating Tool Spindle Motor: 7.5 HP
Y-AXIS
Y-Axis Travel: 4" (+/- 2")
Y-Axis Rapid Traverse Rate: 295 IPM
Y-Axis Repeatability: .00012"
Equipped with:
LNS Quick Load Servo S3 Bar Feeder
Chip Conveyor
Parts Catcher
Tool Probe
Y-Axis
Sub-Spindle with Ball Screw Positioning
Full C-Axis
6ea. Turn tool blocks
3ea single OD pods
3ea three hole OD pods
2ea straight on turn blocks
2ea Part off holder blocks
6ea Live -X- axis tools
4ea Live -Z- axis tools
**Power on 45972 hours**
**Operating time 27420 hours**
**Cutting time 14082 hours**