Telesis Model E-Series EY 5 Fiber Laser Marking System (2010)

Telesis Model E-Series EY 5 Fiber Laser Marking System
Compliance: CDRH
Laser Type: fiber-coupled, diode-pumped,
Q-switched: Nd:YAG
Wavelength: 1064 nanometers (nm)
Mode: TEM00
Average Power: 5 watts at 1064 nm
Long Term Output Power Drift: < 2%
Max. Power Consumption: < 500 watts
Expected Diode Lifetime: > 20,000 hours
Input Power: 95 to 250 VAC, 6 amps,
50/60 Hz single phase
Supply Voltage Fluctuation: < 10% with clean ground line
Operating Temperature: 18 to 35C (65 to 95F
Recommended Temperature: 20 to 25C (68 to 77F)
Ambient Relative Humidity: 10% to 85% non-condensing
SYSTEM OPTIONS
Desktop computer or notebook computer with powered
cardbus-to-PCI expansion enclosure
Remote pushbutton station (start/abort)
Externally-mounted focus-finder diode
Mark-on-the-fly kit to interface with customer-supplied
encoder for marking objects in motion (linear or circular)
I/O options (see Remote Communications for details):
TTL via PCI-DIO24 Board (Kit #53920)
Opto-isolated via Merlin DCIO Module (Kit #53928)
Two-axis Controller (for auxiliary axes; additional I/O)
Programmable tool post for vertical (z-axis) adjustment
(requires two-axis controller)
Rotary drive fixture for rotational (theta-axis) adjustment
(requires two-axis controller)
Workstation / work area enclosure
Fume extraction systems
EY5 LASER MARKING HEAD
The EY5 has a unique, space-saving "L" shaped footprint.
Designed for easy maintenance, the galvo head is mounted at a
90 angle to the laser rail. A heat exhaust fan is located on the
right side of the unit (as viewed from the connector panel).
The laser marking head encloses the sealed laser resonator, the
beam expander, the turning mirror, the red aiming diode, and the
galvanometer assembly.
EY5 Laser Marking Head Specifications
Dimensions (L x D x H)............ 438.85 x 303.73 x 138.03 mm
(17.277 x 11.958 x 5.434 in.)