Davi Model MC03030 5/8" x 10' Plate Bending Roll (2005)

Hydraulic Drop End
Independent Drive Motor on All 3 Rolls
Range
The most common design in the plate roll market, with a fixed top roll,
The two side rolls swing up for pre-bending and rolling.
The MCO three roll double pinch can roll plates from 15-20 mm
(5/8 inch 3/4 inch) thickness, up to 80-100 mm (3inch 4 Inch), or more,
or more, ideal for limited production volumes.
The MCO has three independently powered rolls, mounted directly to each
each roll shaft to offer the market's most powerful torque transmission
available. This ensures excellent plate feeding without the risk of plate
slipping. Standard feature on other brands offer only the top roll OR
only the two side rolls powered, making thin, narrow or large diameter
cylinders hard to properly feed. Optional auxiliary motors can be offered
on request, but these are small and without much power.
The MCO has three independently powered rolls, mounted directly to each
roll shaft to offer the market's most powerful torque transmission
available. This ensures excellent plate feeding without the risk of plate
slipping. Standard feature on other brands offer only the top roll OR only
the two side rolls powered, making thin, narrow or large diameter
cylinders hard to properly feed. Optional auxiliary motors can be offered
on request, but these are small and without much power.