NISSEI FS160

Nissei Model FS160S36ASEK 177 Ton Thermoset Molder
Platen Size: 26" X 26"
Dist. Between Tie Bars: 18" X 18"
Clamp Stroke: 18.5"
Max. Daylight (without spacers): 34.6"
Max. Daylight (with spacers): 26.4"
Min. Mold Thickness (with spacers): 7.9"
MIn. Mold Thickness (without spacers:16"
Ejector Stroke: 3.9"
Equipped with:
NC-8000F Control
14.8 oz. thermoset injection Unit
Hydraulic Knockouts
Yushin HOP III Robitic Pickoff Attachment
Top MOunted Plain Cone Bottom Shot Hopper
4.4 KW Four Zone Heater
22 KW Main Drive Hyd. Pump Motor
M-Card
Mold Sweep
Mounting Pads
Yushin Sprue Picker