Clausing SG-1224ASDIII 12" x 24" Hydraulic Surface Grinder (2018)
Clausing SG-1224ASDIII 12" x 24" Hydraulic Surface Grinder (2018)
• Table Size: 12" × 24"
• Max Longitudinal Travel: 25.59" hydraulic / 28.74" manual (approx. 23.625" grinding length)
• Table Speed: 196 – 984 in/min (infinitely variable)
• Max Cross Travel: 12.2" auto / 13.39" manual (approx. 11.81" grinding width)
• Auto Cross Increment: 0.04" – 0.75" (plus continuous feed options)
• Spindle Centerline to Table: 23" max (optional 28.35")
• Vertical Downfeed: 0.00005" – 0.0025" automatic infeed; 0.00004" step jog
• Spindle Speed & Wheel: 1,750 RPM; 12" diameter × 1.25" width × 3" bore
• Motors & Power: 5 HP spindle motor (2 HP hydraulic, 1 HP crossfeed, 1/4 HP elevating); 230V/460V 3-phase
• Ways & Construction: Heavy cast-iron base and ribbed column; Turcite B coated V and flat ways with automatic lubrication
• Weight & Footprint: ~4,387 lbs; 106.3" L × 63" W × 73" H
Control & Grinding Capabilities
• Controller: Delta PLC with a 7.2" color touch screen and conversational programming.
• Vertical & Cycle Setup: Allows setting vertical zero, start point, rough/finish grinding volumes, target point, wheel rise-up point, and intermittent spark-out.
• Drive Architecture: Dual-motor vertical feed (rapid up/down and micro downfeed positioning) paired with motorized/servo cross travel for plunge, traverse, and continuous grinding modes.
Clausing SG-1224ASDIII 12" x 24" Hydraulic Surface Grinder (2018)
Imperial
| Table-W | 12" |
| Table-L | 24" |
| Horz/Vert | Horz |
| Power | 5 hp |
| Grinding Wheel Width | 1.25" |
| Grinding Wheel Dia. | 12" |
Clausing SG-1224ASDIII 12" x 24" Hydraulic Surface Grinder (2018)
• Table Size: 12" × 24"
• Max Longitudinal Travel: 25.59" hydraulic / 28.74" manual (approx. 23.625" grinding length)
• Table Speed: 196 – 984 in/min (infinitely variable)
• Max Cross Travel: 12.2" auto / 13.39" manual (approx. 11.81" grinding width)
• Auto Cross Increment: 0.04" – 0.75" (plus continuous feed options)
• Spindle Centerline to Table: 23" max (optional 28.35")
• Vertical Downfeed: 0.00005" – 0.0025" automatic infeed; 0.00004" step jog
• Spindle Speed & Wheel: 1,750 RPM; 12" diameter × 1.25" width × 3" bore
• Motors & Power: 5 HP spindle motor (2 HP hydraulic, 1 HP crossfeed, 1/4 HP elevating); 230V/460V 3-phase
• Ways & Construction: Heavy cast-iron base and ribbed column; Turcite B coated V and flat ways with automatic lubrication
• Weight & Footprint: ~4,387 lbs; 106.3" L × 63" W × 73" H
Control & Grinding Capabilities
• Controller: Delta PLC with a 7.2" color touch screen and conversational programming.
• Vertical & Cycle Setup: Allows setting vertical zero, start point, rough/finish grinding volumes, target point, wheel rise-up point, and intermittent spark-out.
• Drive Architecture: Dual-motor vertical feed (rapid up/down and micro downfeed positioning) paired with motorized/servo cross travel for plunge, traverse, and continuous grinding modes.
We use cookies to improve your experience. Privacy Policy.