Brother Speedio R450X2 Vertical Machining Center (2021), 1400 Hours
Brother Speedio R450X2 Vertical Machining Center (2021)
Specification Imperial Measurement
X-Axis Travel 17.7 in
Y-Axis Travel 12.6 in (11.4 in with rotary joint)
Z-Axis Travel 12.0 in
Spindle Nose to Table 7.9 – 19.9 in (9.8 – 21.9 in low-floor)
Table Work Area (Per Face) 23.6 × 11.8 in
Max Table Load (Per Face) 265 lbs (up to 441 lbs optional)
Spindle & Motor Configurations
• Optional 16,000 RPM High-Speed Spindle. Operates from 16 to 16,000 RPM with a 9.9 HP (10-minute) / 6.8 HP (continuous) motor.
Feedrates & Tool Changer
Specs reported by MachineTools.com and Brother include:
• Rapid Traverse (X / Y / Z). 1,969 inches per minute (IPM) across all three linear axes.
• Max Cutting Feedrate. 1,181 inches per minute (IPM).
• Automatic Tool Changer (ATC). 14-tool or 22-tool magazine options.
• Tool Change Time. 0.8 seconds tool-to-tool, with a chip-to-chip time of 1.4 seconds (14-tool) or 1.6 seconds (22-tool).
• Pallet Index Time. 2.9 seconds for a 180-degree turntable rotation.
Dimensions, Power & Utilities
• Axis Feed Motors. 1.3 HP for X and Y axes, and 2.4 HP for the Z axis.
• Footprint (W × D × H). 55.4 × 104.5 × 101.9 in.
• Machine Weight. Approximately 5,954 lbs.
• Air Supply. 58 – 87 PSI (72.5 PSI recommended) at 1.59 CFM.
• Electrical Requirements.
1400 Hours
Brother Speedio R450X2 Vertical Machining Center (2021), 1400 Hours
Imperial
| X Travel | 17.7" |
| Y Travel | 12.6" |
| Z Travel | 12" |
| Power | 13 hp |
| RPM | 16,000 RPM |
| # ATC | 14 |
| Taper | BT-30 |
Brother Speedio R450X2 Vertical Machining Center (2021)
Specification Imperial Measurement
X-Axis Travel 17.7 in
Y-Axis Travel 12.6 in (11.4 in with rotary joint)
Z-Axis Travel 12.0 in
Spindle Nose to Table 7.9 – 19.9 in (9.8 – 21.9 in low-floor)
Table Work Area (Per Face) 23.6 × 11.8 in
Max Table Load (Per Face) 265 lbs (up to 441 lbs optional)
Spindle & Motor Configurations
• Optional 16,000 RPM High-Speed Spindle. Operates from 16 to 16,000 RPM with a 9.9 HP (10-minute) / 6.8 HP (continuous) motor.
Feedrates & Tool Changer
Specs reported by MachineTools.com and Brother include:
• Rapid Traverse (X / Y / Z). 1,969 inches per minute (IPM) across all three linear axes.
• Max Cutting Feedrate. 1,181 inches per minute (IPM).
• Automatic Tool Changer (ATC). 14-tool or 22-tool magazine options.
• Tool Change Time. 0.8 seconds tool-to-tool, with a chip-to-chip time of 1.4 seconds (14-tool) or 1.6 seconds (22-tool).
• Pallet Index Time. 2.9 seconds for a 180-degree turntable rotation.
Dimensions, Power & Utilities
• Axis Feed Motors. 1.3 HP for X and Y axes, and 2.4 HP for the Z axis.
• Footprint (W × D × H). 55.4 × 104.5 × 101.9 in.
• Machine Weight. Approximately 5,954 lbs.
• Air Supply. 58 – 87 PSI (72.5 PSI recommended) at 1.59 CFM.
• Electrical Requirements.
1400 Hours
We use cookies to improve your experience. Privacy Policy.