Fadal VMC-4020FX 4 Axis Vertical Machining Center (2008)

Fadal VMC-4020FX 4 Axis Vertical Machining Center (2008)

Travels & Work Envelope

• X-Axis Travel. 40 inches (1,016 mm).
• Y-Axis Travel. 20 inches (508 mm).
• Z-Axis Travel. 20 inches (508 mm) standard, with an optional extended Z-axis of 28 inches (711 mm).
• Spindle Nose to Table. 4" to 24" on standard Z-axis models, or 4" to 32" with the extended Z-axis option.
• Spindle Center to Column. 20.11 inches.

Table & Capacity

• Table Dimensions. 48" × 20" (1,219 mm × 508 mm).
• T-Slots. 5 slots measuring 0.709" wide on 3.74" centers.
• Maximum Table Load. 3,300 to 3,641 lbs (evenly distributed) depending on model year and configuration.

Spindle & Feed Rates

• Spindle Taper. CAT-40 (BT-40 optional).
• Spindle Speed. 40 – 10,000 RPM (7,500 or 8,000 RPM on select early configurations).
• Spindle Drive Motor. 15 HP standard, with optional 22.5 HP or 30 HP high-torque packages.
• Maximum Torque. 60 to 160 ft-lbs standard, up to 220 or 270 ft-lbs on high-torque spindle packages.
• Rapid Traverse Rates. 900 IPM (X/Y/Z) on later MAG Fadal FX models (700 IPM X/Y and 600 IPM Z on earlier builds).
• Maximum Cutting Feed Rate. 400 to 600 IPM.
• Positioning Accuracy & Repeatability. ±0.0002" positioning accuracy and ±0.0001" repeatability.

Automatic Tool Changer (ATC)

• Tool Capacity. 21 stations (umbrella-style) standard, or 24 stations (side-mount dual-arm) on select configurations.
• Maximum Tool Weight. 15 lbs.
• Maximum Tool Diameter. 3" to 4.5" with adjacent pockets full (6" with empty adjacent pockets).
• Maximum Tool Length. 13" to 15"