AMADA FO-3015 4000 Watt CNC Laser (2008)
Have one to sell?
ConditionUsed
1 available
AMADA FO-3015 CNC Laser (2008), 4000 Watt
AMADA FO-3015 4000 Watt CNC Laser (2008)
Work Envelope & Motion System
• Maximum Sheet Size. Accommodates standard 5' × 10' (60" × 120") sheets on a stationary dual-pallet shuttle table.
• Axis Travel. Provides 122.8" (X-axis), 61.0" (Y-axis), and 7.87" (Z-axis) of cutting head travel.
• Maximum Rapid Traverse. Reaches 3,150 inches per minute (IPM) per axis on X and Y, 4,454 IPM at a 45° vector, and 2,362 IPM on the Z-axis.
• Positioning Accuracy & Repeatability. Achieves ±0.0004" per 20" positioning accuracy and ±0.0002" (±0.005 mm) repeatability.
• Maximum Workpiece Weight. Supports up to 1,875 lbs per pallet.
• Drive System. Uses dual-drive rack and pinion on the X-axis, ball screws on Y and Z, and Fanuc AC servo motors across all three axes.
Laser Resonator & Cutting Capacities
• Resonator Model & Type. Equipped with a Fanuc C4000i-C RF-discharge-excited, fast-axial-flow CO2 laser oscillator.
• Power & Beam Specs. Delivers 4,000 W rated continuous-wave output at a 10.6 µm wavelength with a 5 to 32,767 Hz pulse frequency range.
• Laser Gas Mixture. Operates on a standard CO2, helium, and nitrogen premix ratio of 5:40:55 (±2% per volume).
• Mild Steel Capacity. Cuts up to 3/4" (0.750") thickness.
• Stainless Steel Capacity. Cuts up to 1/2" (0.500") thickness with oxygen assist and 3/8" (0.375") with high-pressure nitrogen clean cut.
• Aluminum Capacity. Cuts up to 1/4" (0.250") to 5/16" (8 mm) depending on alloy grade.
• Assist Gas System. Features 4 assist gas ports with NC-programmable pressure control and Water Assisted Cutting System (WACS) cooling.
Control, Dimensions & Utility Requirements
• CNC Control. Runs the Amada AMNC-F PC-based touchscreen control with network connectivity.
• Machine Footprint. Measures 385" long by 107" wide (roughly 32' × 9') with an approximate height of 86".
• Approximate Machine Weight. Weighs approximately 26,400 lbs (12 metric tons) for the main frame and shuttle assembly.
• Electrical Power Requirement. Requires approximately 62 kVA total connected power for the machine, resonator, chiller, and dust collector (typically 200/208V or 460/480V 3-phase via step-down transformer).
• Compressed Air Requirement. Requires clean, dry shop air at roughly 0.97 MPa (140 psi) with flow rates between 600 and 1,000 L/min (21 to 35 CFM).
Dust collector, chiller, everything you need to get cutting. 60x120 dual shuttle tables. All regular maintenance is done as needed, recently had all new optics installed and high level PM on the tubes. Gas pressure regulator is brand new along with a new nozzle head. Well Maintained
AMADA FO-3015 CNC Laser (2008), 4000 Watt
Imperial
| size | 5' x 10', |
| Sheet-W | 60" |
| Sheet-L | 120" |
| Wattage | 4000 w |
AMADA FO-3015 4000 Watt CNC Laser (2008)
Work Envelope & Motion System
• Maximum Sheet Size. Accommodates standard 5' × 10' (60" × 120") sheets on a stationary dual-pallet shuttle table.
• Axis Travel. Provides 122.8" (X-axis), 61.0" (Y-axis), and 7.87" (Z-axis) of cutting head travel.
• Maximum Rapid Traverse. Reaches 3,150 inches per minute (IPM) per axis on X and Y, 4,454 IPM at a 45° vector, and 2,362 IPM on the Z-axis.
• Positioning Accuracy & Repeatability. Achieves ±0.0004" per 20" positioning accuracy and ±0.0002" (±0.005 mm) repeatability.
• Maximum Workpiece Weight. Supports up to 1,875 lbs per pallet.
• Drive System. Uses dual-drive rack and pinion on the X-axis, ball screws on Y and Z, and Fanuc AC servo motors across all three axes.
Laser Resonator & Cutting Capacities
• Resonator Model & Type. Equipped with a Fanuc C4000i-C RF-discharge-excited, fast-axial-flow CO2 laser oscillator.
• Power & Beam Specs. Delivers 4,000 W rated continuous-wave output at a 10.6 µm wavelength with a 5 to 32,767 Hz pulse frequency range.
• Laser Gas Mixture. Operates on a standard CO2, helium, and nitrogen premix ratio of 5:40:55 (±2% per volume).
• Mild Steel Capacity. Cuts up to 3/4" (0.750") thickness.
• Stainless Steel Capacity. Cuts up to 1/2" (0.500") thickness with oxygen assist and 3/8" (0.375") with high-pressure nitrogen clean cut.
• Aluminum Capacity. Cuts up to 1/4" (0.250") to 5/16" (8 mm) depending on alloy grade.
• Assist Gas System. Features 4 assist gas ports with NC-programmable pressure control and Water Assisted Cutting System (WACS) cooling.
Control, Dimensions & Utility Requirements
• CNC Control. Runs the Amada AMNC-F PC-based touchscreen control with network connectivity.
• Machine Footprint. Measures 385" long by 107" wide (roughly 32' × 9') with an approximate height of 86".
• Approximate Machine Weight. Weighs approximately 26,400 lbs (12 metric tons) for the main frame and shuttle assembly.
• Electrical Power Requirement. Requires approximately 62 kVA total connected power for the machine, resonator, chiller, and dust collector (typically 200/208V or 460/480V 3-phase via step-down transformer).
• Compressed Air Requirement. Requires clean, dry shop air at roughly 0.97 MPa (140 psi) with flow rates between 600 and 1,000 L/min (21 to 35 CFM).
Dust collector, chiller, everything you need to get cutting. 60x120 dual shuttle tables. All regular maintenance is done as needed, recently had all new optics installed and high level PM on the tubes. Gas pressure regulator is brand new along with a new nozzle head. Well Maintained
We use cookies to improve your experience. Privacy Policy.