Romi M20 20" x 60" CNC Lathe (2005)

Romi M20 20" x 60" CNC Lathe (2005)

A highly accurate flat-bed CNC/Manual teach lathe. It combines the ease of manual operations with two MPG electronic handwheels and full CNC execution via the Fanuc 21i-T control system.
The factory specifications for this model configuration are detailed below:

Capacities & Working Range
Distance Between Centers: 60" (1,524 mm)
Swing Over Bed: 20.5" (520 mm)
Swing Over Cross Slide: 10.2" (259 mm)
Swing Over Saddle Wings: 17.7" (450 mm)
Center Height: 10.04" (255 mm)
Bed Width: 13.39" (340 mm)
⚙️ Spindle & Headstock
Spindle Bore: 3.15" (80 mm) (Note: Standard bar capacity maxes out around 3.0")
Spindle Nose: A2-6 (Optionally A2-8 depending on chuck packages)
Spindle Speed Range: Variable from 2 to 2,200 RPM (Up to 3,000 RPM peak capacity)
Main Motor Power: 15 HP (11.2 kW)

Travels & Feed Rates
X-Axis Travel (Cross Slide): 11.02" (280 mm)
Z-Axis Travel (Longitudinal): 60" (1,524 mm)
X-Axis Rapid Traverse: 295 IPM (7.5 m/min)
Z-Axis Rapid Traverse: 394 IPM (10 m/min)
🐎 Tailstock
Quill Diameter: 3.15" (80 mm)
Quill Travel: 5.12" (130 mm)
Inner Taper: #4 MT (Morse Taper)
🔌 Physical & Electrical Requirements
Power Supply: 220V–240V AC / 3-Phase / 60 Hz
Approximate Footprint (L x W x H): ~124" x 65" x 78"
Approximate Machine Weight: ~8,000 lbs (3,628 kg)