Marvel Amada Spartan SIW126D Hydraulic Ironworker (2023)
Have one to sell?
ConditionUsed
1 available
Marvel Amada Spartan SIW126D Hydraulic Ironworker, • Punching & Shearing Force. 126 tons (rated on 65,000 PSI tensile strength mild steel).
• Motor & Electrical. 15 HP motor operating on 230V or 460V, 3-phase, 60Hz power with 24V DC control voltage.
• Hydraulic System. 26.4-gallon oil capacity operating at 3,690 PSI.
• Footprint & Weight. Measures 81" L x 38" W x 86" H and weighs 6,550 lbs net (the deep-throat MSIW126DX variant extends to 93" L and 7,650 lbs).
Marvel Amada Spartan SIW126D Hydraulic Ironworker (2023)
Workstation Specification / Attribute Capacity / Rating
Punching Standard Tooling Capacity 1-1/2" in 1" (up to 1-5/8" x 1" per factory chart)
Large / Oversize Tooling 2" in 3/4" (Large) / 4-5/16" in 5/16" (Oversize)
Throat Depth & Stroke 14" Throat (24" on DX model) / 3-1/8" to 3-3/8" Stroke
Speed & Work Height 25 cycles/min (at 3/4" stroke) / 43-3/4" work height
Flat Bar Shear Max Thickness / Max Width 14" x 1" / 24" x 9/16"
Blade Length & Trim 24" blade / 5" x 5/8" angle flange trim (37" work height)
Angle Shear 90° / 45° Cut Capacity 6" x 6" x 5/8" (90°) / 3" x 3" x 3/8" (45°) (48" work height)
Bar & Section Shear Round / Square Bar 2" Round / 2" x 2" Square
Structural Shapes 7" Channel / 7" H-Beam / 5" x 1/2" T-Beam (37" work height)
Notching Rectangular / Large V 2-3/8" x 4" x 1/2" (Rect.) / 4" x 4" x 1/2" (Large V) (37" work height)
Marvel Amada Spartan SIW126D Hydraulic Ironworker, • Punching & Shearing Force. 126 tons (rated on 65,000 PSI tensile strength mild steel).
• Motor & Electrical. 15 HP motor operating on 230V or 460V, 3-phase, 60Hz power with 24V DC control voltage.
• Hydraulic System. 26.4-gallon oil capacity operating at 3,690 PSI.
• Footprint & Weight. Measures 81" L x 38" W x 86" H and weighs 6,550 lbs net (the deep-throat MSIW126DX variant extends to 93" L and 7,650 lbs).
Marvel Amada Spartan SIW126D Hydraulic Ironworker (2023)
Workstation Specification / Attribute Capacity / Rating
Punching Standard Tooling Capacity 1-1/2" in 1" (up to 1-5/8" x 1" per factory chart)
Large / Oversize Tooling 2" in 3/4" (Large) / 4-5/16" in 5/16" (Oversize)
Throat Depth & Stroke 14" Throat (24" on DX model) / 3-1/8" to 3-3/8" Stroke
Speed & Work Height 25 cycles/min (at 3/4" stroke) / 43-3/4" work height
Flat Bar Shear Max Thickness / Max Width 14" x 1" / 24" x 9/16"
Blade Length & Trim 24" blade / 5" x 5/8" angle flange trim (37" work height)
Angle Shear 90° / 45° Cut Capacity 6" x 6" x 5/8" (90°) / 3" x 3" x 3/8" (45°) (48" work height)
Bar & Section Shear Round / Square Bar 2" Round / 2" x 2" Square
Structural Shapes 7" Channel / 7" H-Beam / 5" x 1/2" T-Beam (37" work height)
Notching Rectangular / Large V 2-3/8" x 4" x 1/2" (Rect.) / 4" x 4" x 1/2" (Large V) (37" work height)
We use cookies to improve your experience. Privacy Policy.