Sunnen CV616 Cylinder King Hone

Sunnen CV616 Cylinder King Hone

• Bore Diameter Range: 0.75" to 8" (19 mm to 203 mm) depending on the tooling and hone heads utilized.
• Maximum Cylinder Length: Up to 18" (450 mm).
• Stroking Length: 0" to 9" adjustable mechanical stroke.
• Spindle Speeds: 4 speeds available: 125, 170, 230, and 310 RPM.
• Stroking Rates: 3 stroke rates available: 41, 57, and 80 SPM (Strokes Per Minute).
• Workpiece Capacity: Accommodates engine block configuration types up to 42" long, including 60°/90° V-blocks and overhead/L-head in-line blocks.
• Max Workpiece Weight: Up to 1,500 lbs (680 kg).

Power & Capacity Specs

• Main Spindle Motor: 2 HP.
• Honing Oil Pump Motor: 0.5 HP.
• Oil Cooler Motor: 0.5 HP.
• Coolant / Oil Reservoir Capacity: 55 Gallons (Integrated filtration system).
• Electrical Configuration: 230V / 460V, 3-Phase, 60 Hz.

Dimensions & Physical Footprint

• Floor Area / Footprint: Approximately 68" W x 65" D x 84" H (Dimensions vary slightly by sub-letter series, up to 72.5" W x 89.75" D).
• Machine Weight: Approximately 2,400 to 2,500 lbs (1,088 kg to 1,133 kg).

Standard Machine Features

• Automatic Feed & Shut-off Size Control: Shuts down automatically when the cycle hits zero on the preset stock removal feed dial.
• Dwell Control: Features selectable single or continuous stroke dwells at the bottom/top of the cycle to fix taper issues.
• Load Meter: Visual indicator gauge to monitor spindle resistance and stroke load.
• Traverse Handwheel: Manual positioning wheel for setting up and alignment.