size | 126" x 90" |
X Travel | 126" |
Y Travel | 90" |
Z Travel | 40" |
Power | 35 hp |
RPM | 6,000 RPM |
# ATC | 40 |
Taper | 50 |
Table-W | 78.7" |
Table-L | 118" |
# Axis | 3 |
Control | CNC (FANUC 31iMB) |
Dimensions | 410 x 256 x 213 |
Weight | 77000 |
TABLE
Table Size 118" x 78.7"
T-Slots (size x number x pitch) 1.1" x 11 x 7.1"
Maximum Table Load 24,200 lbs
Distance from Table Surface to Floor 37.4"
AXES MOVEMENTS
X-Axis Travel (longitudinal movement) 126"
Y-Axis Travel (cross movement) 90.6"
Z-Axis Travel (vertical movement) Std: 39.4"
Opt: 47.2"
Distance from Spindle End to Table Std: 5.9" ~ 45.3"
Opt: 5.9" ~ 53.1"
Distance between the Columns 98.4"
SPINDLE
Spindle Nose Taper CAT-50 / BT-50
Gear head (2-speed) 6,000 rpm (30-min) 35 HP
Direct Drive 10,000 rpm (30-min) 35 HP
FEED RATES
Cutting Feed Rate (XYZ Axes) 276 ipm
Rapid Traverse (X/Y/Z Axes) 472 / 472 / 472 ipm
BALLSCREWS
BallScrew Diameter (X/Y/Z Axes) Ø3.1" / Ø2.5" / Ø2.0"
AXIS DRIVE MOTORS
Fanuc Servomotors (XYZ axes) 12.1 / 12.1/ 9.4 HP
Axis Thrust (X/Y/Z axes) 5,637 / 4,699 / 4,228 lbf
AUTOMATIC TOOL CHANGER – ARM TYPE
Tool Storage Capacity: 40pcs (60 / 90pcs optional)
Maximum Tool Weight 45 lbs
Maximum Tool Size (dia x length)
(no adjacent tool) Ø4.9" x 15.7"
Ø9.6" x 15.7"
Tool Change Time - tool to tool 5 sec
Tool Selection Random
Tool Shank CAT-50 / BT-50
Retention Knob P50T-1
MISCELLANEOUS
Electricity 208/220 Volts 65 kVA
Compressed Air (min ½" air supply line) 90 psi
Coolant Tank Capacity 110 gal
• FANUC 31iMB controller
• Data server (2GB) + AICC ll
• 125˝ x 91˝ x 39˝ XYZ
• 6000 RPM gear spindle
• 50 HP motor
• CAT-50 taper
• 40-Tool ATC arm type,
• Chip conveyor
• Coolant through spindle
• Roof guarding