Charmilles Robofil 290 Edm Wire Type
Elect Discharge-CNC Wire Type
| Table Size-W | 19.7" |
| Table Size-L | 33.5" |
| X | 15.7" |
| Y | 9.8" |
| Z | 7.87" |
| Control | CNC (Charmilles cnc control) |
| Weight | 5,600 |
U-V Stroke: 15.75" x 9.8"
Taper Angle: ± 30º
Wire Diameter: .004 to .012”
Maximum Work Piece Size: 33.5 x 19.7 x 7.9”
Maximum Work Piece Weight: 1,102
Machine Dimensions: 70.9 x 63 x 82.7”
Machine Weight: 4,850 lbs.
ISO PULSE Control:
Maximum Cutting Speed: 23.25 sq.in./hr.
CRT: 14” Color graphic
Input Method: 3.5” Floppy Disk, M.D.I., RS-232 Serial Port
Power Requirements: 10kVA – 380V / 3 phase / 50/60 Hz
Control Features:
-Automatic Wire Alignment
-Programmable Flushing
-Remote Control
-Close Loop Glass Scale Feedback on all axes
-Machining strategies
-Auto re-start after supply failure
-Auto Selection of Machining Settings
Dielectric:
Dielectric Capacity: 80 gallons
Filtering System: 8– Paper Cartridges
Machine Features:
- Automatic Wire Threading
- Co-Axial Flushing
- Chiller
auto wire threading, color graphics monitor, remote hand pendant, filtration system
.jpeg)