size | 10" chuck |
Swing | 16.9" |
Machining Length | 20" |
# Axis | 4 |
Chuck Size | 10" |
Bar Capacity | 1.77" |
Power | 17.5 hp |
Max RPM | 6,300 RPM |
Turning Dia | 6.2" |
Tailstock | Yes |
Live Tooling | Yes |
Sub Spindle | Yes |
Control | CNC (Fanuc 0i-TC) |
Emco Maier Emcoturn E45 CNC Lathe w/ Live Tooling, Sub Spindle and Y Axis
Specifications and Equipment
Swing over bed: 16.9"
Swing over cross slide: 8.3"
Maximum part length: 20"
X-Axis travel: 6.29"
Rapid traverse to X-axis: 787 IPM
Z-Axis travel: 12.2"
Z-Axis rapid traverse: 944 IPM
Y-Axis +40/-30mm
Bar capacity through spindle: 1.77"
Spindle speeds: 0 to 6,300 RPM
Spindle index increment: 0.001 Degrees (Full C-axis)
Spindle drive motor: 17.5 HP
Turret tool positions: 12
Live tool positions available: 12
Live tool drive speeds: 0 to 5,000 RPM
Maximum torque to live tool drive: 11.8 foot-pounds
Bar feed system: Emco "Compact Load E45"
Bar feed capacity: 31.5" Bar length X 1.77" bar dir
Bar feed magazine capacity: 13 Bars of 1.77" diameter
CNC Type: Fanuc 0i-TC
Utilization: Medical, Under 3000 Hours
Fanuc 0i-TC, Y axis Live Tool, Sub Spindle, Chip Conveyor, 3 Jaw Chucks
on Main and Sub, C Axis on Main/Sub, USB Interface, Ethernet, MPG,
Remote Jog Handwheel, Parts Catcher, Transformer