5/8" x 10' Davi Model MC03030 Plate Bending Roll (2005)
Rolls-Plate and Sheet5/8" x 10' Capacity, Hydraulic
size | 5/8" x 10' |
Length of Rolls | 120' |
Max Thickness | 58" |
# Rolls | 4 |
Hyd/Mech | Hyd |
Power Rear Roll (Yes/No) | Yes |
DAVI Model MCO3030 5/8" x 10' Hydrauiic Plate Bending Roll
5/8" x 10' Capacity, Hydraulic
Overall Bending Length: 10'
Number of Rolls: 3
Overall Length of Rolls: 120
Bending Capacity - Mild Steel: 10 x 5
Pre-Bending Capacity - Mild Steel: 10 x 3/8
Diameter of Top Roll: 12.2"
Rolling Speed: Variable
Motor - Main Drive: 18 HP 460V 3/60
Hydraulic Drop End
Independent Drive Motor on All 3 Rolls
Range
The most common design in the plate roll market, with a fixed top roll,
The two side rolls swing up for pre-bending and rolling.
The MCO three roll double pinch can roll plates from 15-20 mm
(5/8 inch 3/4 inch) thickness, up to 80-100 mm (3inch 4 Inch), or more,
or more, ideal for limited production volumes.
The MCO has three independently powered rolls, mounted directly to each
each roll shaft to offer the market's most powerful torque transmission
available. This ensures excellent plate feeding without the risk of plate
slipping. Standard feature on other brands offer only the top roll OR
only the two side rolls powered, making thin, narrow or large diameter
cylinders hard to properly feed. Optional auxiliary motors can be offered
on request, but these are small and without much power.
The MCO has three independently powered rolls, mounted directly to each
roll shaft to offer the market's most powerful torque transmission
available. This ensures excellent plate feeding without the risk of plate
slipping. Standard feature on other brands offer only the top roll OR only
the two side rolls powered, making thin, narrow or large diameter
cylinders hard to properly feed. Optional auxiliary motors can be offered
on request, but these are small and without much power.