Super Master Model SM150HC 150 Ton Horizontal Plastic Injection Molder *** Less than 5000 hours *** Screw Diameter: 1.4" Shot Weight (PS): 178g Shot Weight (PS): 6.3 oz. Injection Pressure: 2900kgf/cm2 Injection Rate: 163cm3/sec Screw Stroke: 7.4" Screw Rotation: 270 RPM Plasticizing Capacity: 16g/sec Screw Diameter: 1.8" Shot Weight (PS): 291g Shot Weight (PS): 10.3 oz Injection Pressure: 1775 kgf/cm2 Injection Rate: 266cm3/sec Screw Stroke: 7.4" Screw Rotation: 270 RPM Plasticizing Capacity: 34g/sec Clamping Force: 150 ton Open Stroke: 23.6" Max. Daylight: 31" Max. Height: 7.4" Space Between Tie Bar: 16.9" Hydraulic Ejector Force: 4.9 tonf Hydraulic Ejector Stroke: 4.9" Pump Motor: 40 HP Heating Capacity: Max. Pressure System: 175 kgf/cm2 Oil Tank Capacity: 450 liter Dry Cycle Time: 8.5 sec.