40" x 26" x 25" Haas Model VM3 5 Axis Vertical Machining Center (2011)

Haas Model VM3 4/5 Axis Vertical Machining Center
X Axis: 40 " 1016 mm
Y Axis: 26 " 660 mm
Z Axis: 25 " 635 mm
Spindle Nose to Table (\ max): 29 " 737 mm
Spindle Nose to Table (\ min): 4 " 102 mm
TABLE: S.A.E.: METRIC
Length: 54 " 1372 mm
Width: 25 " 635 mm
T-Slot Width: 5/8 " 16 mm
T-Slot Center Distance: 3.937 " 100.00 mm
Number of Std T-Slots: 13 in Y, 6 in X 13 in Y, 6 in X
Max Weight on Table: (evenly distributed): 4000 lb 1814 kg
SPINDLE: S.A.E.: METRIC
Max Rating: 30 hp: 22.4 kW
Max Speed: 12,000 rpm: 12,000 rpm
Max Torque: 90 ft-lb @ 2000 rpm 122 Nm @ 2000 rpm
Drive System: Inline Direct-Drive Inline Direct-Drive
Taper: CT or BT 40 CT or BT 40
FEEDRATES: S.A.E. METRIC
Rapids on X: 710 in/min 18.0 m/min
Rapids on Y: 710 in/min 18.0 m/min
Rapids on Z: 710 in/min 18.0 m/min
Max Cutting: 500 in/min 12.7 m/min
AXIS MOTORS: S.A.E. METRIC
Max Thrust X: 4100 lb 18238 N
Max Thrust Y: 4100 lb 18238 N
Max Thrust Z: 4100 lb 18238 N
TOOL CHANGER: S.A.E. METRIC
Type: SMTC SMTC
Capacity: 24+1 24+1
Max Tool Diameter (adjacent empty): 5.0 " 127 mm
Max Tool Diameter (full): 3.0 " 76 mm
Max Tool Length (from gage line): 13 " 330 mm
Max Tool Weight: 12 lb 5.4 kg
Tool-to-Tool (avg): 2.8 sec 2.8 sec
Chip-to-Chip (avg): 3.6 sec 3.6 sec
GENERAL: S.A.E.: METRIC
Air Required: 4 scfm, 100 psi 113 L/min, 6.9 bar
Coolant Capacity: 55 gal 208 L
Equipped With
Koma TT-12205-00 TN-161 4th and 5th Axis Trunion Table (At Extra Cost)
Haas CNC Control
Coolant Through Spindle 300 PSI
12000 RPM
(10) 40 Taper Tool Holder
24 Position Side Mount Tool Changer