43" x 160" Takang Model TK-43160K Geared Head Gap Bed Engine Lathe (1988)

Takang Model TK-43160K 43" x 160" Geared Head Gap Bed Engine Lathe
Swing over bed: 41.7"
Swing over cross slide: 29.5"
Swing over gap: 63.3"
Center height: 20.8"
Width of gap: 22.4"
Bed width / Auxiliary guide: 22" / 25.9"
Between centers: 160"
Headstock: Spindle bore,dia. 6 1/8"
Spindle nose: A2-11
Spindle speeds (rpm), 12steps: 5-620
Main spindle motor: 20HP
Cross travel: (21.2")
Cross feeds: 0.065-0.96 mm / rev (48kinds)
Longitudinal feeds: 0.13-1.92 mm / rev (48kinds)
Lead screw diameter: 50mm (1.9") x 2TPI
Threading range, Metric: 2-30mm / pitch (44kinds)
Threading range, Inch: 1-15TPI (48kinds)
Module pitch threads: 1-15M (32kinds)
DP. Pitch threads: 2-30P (48kinds)
Compound rest travel: 11.8"
Tool size: 40 x40mm (1.5 x1.5")
Rapid motor: 1/2HP
Tailstock: Quill Diameter 140mm (5.5") [Opt. bigger quill Diamet]
Center taper: MT6
Quill travel: 300mm (11.8")
Miscellaneous: Coolant pump 1/4HP
Equipped With
32" 4 Jaw Chuck
Removable Gap
Inch Metric Threading
Tailstock
Taper Attachment
(2) 3 Point Roller Bearing Steady Rests
(1) 4 Way Tool Post
Miscellaneous Tool Holders and Centers
*** Specifications Pending Verification ***